Dry Chemical Powder Fire Extinguishers are the most widely used type of fire extinguisher. They discharge a fine powder that absorbs fuel molecules, depriving the fire of a fuel source.

Carbon dioxide fire extinguishers are designed to protect areas where Class B and electrical fires occur. CO2 extinguishers are used indoors where winds and drafts do not affect discharge and where clean agent is required.

Foam fire extinguishers (or AFFF fire extinguishers) are more versatile than water and are lighter in weight compared with water equivalents delivering similar suppressant performance. Foam fire extinguishers can be used for Class A & B fires but are not recommended for fires involving electricity unless the electrical current can be disconnected first. Foam fire extinguishers are colour coded with a cream label. A foam fire

water fire extinguishers used for. Water extinguishers are used on solids such as wood, paper, fabrics and other A class fire risks. The water cools the fire and extinguishes it. It penetrates into burning fabrics and can extinguish pockets of fire even deep in the core of the fire.

Wet chemical fire extinguishers are usually supplied with a long lance which helps to safely deploy the foam. The wet chemical forms a thick soapy foam-like blanket over the surface of the burning oil/fat which stops oxygen from reaching the fire and smothers the flames.

FIREFIGHTING EQUIPMENT
FIRE HOSE REEL

FIREFIGHTING EQUIPMENT
FIRE HOSE

FIREFIGHTING EQUIPMENT
LANDING VALVE

FIREFIGHTING EQUIPMENT
BREECHING INLET

FIRE DETECTION & ALARM SYSTEMS
CONVENTIONAL

FIRE DETECTION & ALARM SYSTEMS
IGN SERIES ADDRESSABLE

FIRE DETECTION & ALARM SYSTEMS
ADX ADDRESSABLE

Fire hydrants are connection point by which firefighters can tap into a supply of water when battling fire. Bristol manufactures a wide range of hydrants to accommodate all demand sizes.

Bristol End Suction Pumps are designed according to NFPA 20 for firefighting applications. This pump is designed with latest technology and has premium components for easy maintenance and absolute efficiency .

Bristol Split Case Pump is a single stage, non-self-priming, centrifugal volute pump with radial suction and discharge port. This pump has a horizontal pump shaft with the impeller placed in the middle of the shaft and with self contained combination bearing housing and seal chamber on both sides of the impeller. Without disturbing the motor or pipe-work, the split case construction enables the pump casing to be dismantled in the horizontal plane along the drive shaft. Removal and dismantling of the internal pump parts e.g. bearings, wear rings, impeller and shaft seal can then take place.

BRISTOL Vertical Turbine centrifugal pump is developed and fabricated by our company, according to NFPA20. This pump is used for any underground water source where the water level is below the pump suction, it’s Impeller remains submerged with the water tank at all times.

In this, firefighting pumps, jockey pumps, its controllers and all accessories are engineered inside the Container. All pipings are in accordance with customer requirements. All large equipment are accessible by doors around the container. Material handling arrangements are provided for easy unit movement.