FIRE DETECTION & ALARM SYSTEMS / CONVENTIONAL
Fire detection systems are systems designed to discover fires early in their development when time will still be available for the safe evacuation of occupants. Bristol offers a complete range of fire detection and alarm systems complying to international standards.
- Fire Alarm Control Panel
- Smoke Detector
- Heat Detector
- Multi-Sensor
- Manual Call Point
- Sounder Strobe
- Alarm Bell
SPECIFICATIONS
| MODEL | B61-801/02 | B61-801/04 | B61-801/08 | B61-801/16 |
| Standard | EN 54-2 / EN 54-4 | |||
| Zones | 2 | 4 | 8 | 16 |
| Power Supply | 220V / 230 VAC / AC110V | |||
| Battery Size | 7Ah / 12V | |||
| Frequency | 50 / 60Hz | |||
| Input Current | 0.35A | |||
| Loop Voltage | 15VDC ~ 28VDC, 300mA | |||
| Fault Output | Volt-free 1A/24VDC | |||
| Auxiliary Power Output | 15VDC ~ 28VDC, Standby 20mA and Action 500mA | |||
| Temperature | 0⁰C ~ 40⁰C | |||
| Humidity | ≤ 95%, non-condensing | |||
| Dimension | 430*330*105mm | |||
| Installation | Wall-mounted | |||
| Cable | 1.5mm2 or above shield cable | |||
SPECIFICATIONS
| MODEL | B61-1001 |
| Standard | EN 54-7 |
| Operating Voltage | 9VDC ~ 28VDC |
| Quiescent Current | ≤60uA |
| Alarm Current | 10mA ≤I ≤ 50mA |
| LED indicator | Red, flashing every 2s ~ 4s when standby; Illuminating when alarm fire |
| Remote indicator output | 10kΩ resistor is required |
| Power-Up Time | ≤ 10s |
| Wiring Method | Polarized two-wire |
| Ingress Protection Rating | IP32 |
| Temperature | -10⁰C ~+ 55⁰C |
| Humidity | ≤95%, non-condensing |
| Dimension | Diameter: 100mm, Height: 43mm (w/out base) |
| Weight | About 120g |
SPECIFICATIONS
| MODEL Series | BFE-C2WBI |
| Standard Dimension | H600mm x W600mm x D300mm |
| Front Fascia | Powder Coated / SS Brush / SS Mirror |
| Back Box | Powder Coated / SS Brush / SS Mirror |
| Hinge | Round Bar / SS Piano Hinges |
| Lock | SS Round Latch Lock |
SPECIFICATIONS
| MODEL | B61-2001 |
| Standard | EN 54-5 |
| Operating Voltage | 9VDC ~ 28VDC |
| Quiescent Current | ≤60uA |
| Alarm Current | 10mA ≤I ≤ 50mA |
| LED indicator | Red, flashing every 2s ~ 4s when standby; Illuminating when alarm fire |
| Remote indicator output | 10kΩ resistor is required |
| Power-Up Time | ≤ 10s |
| Class | A1R |
| Wiring Method | Polarized two-wire |
| Ingress Protection Rating | IP32 |
| Temperature | -10⁰C ~+ 55⁰C |
| Humidity | ≤95%, non-condensing |
| Dimension | Diameter: 100mm, Height: 43mm (w/out base) |
| Weight | About 120g |
SPECIFICATIONS
| MODEL | BF-SH-0115-2 | BF-SH-0115-3 | BF-SH-0115-4 |
| Wiring Configuration | 2-Wire | 3-Wire with Remote Indicator Output | 4-Wire with Relay Output |
| Standard | EN 54-5 / EN 54-7 | ||
| Voltage Range | 12-30VDC | ||
| Standby Current | 55µA | ||
| Alarm Current @ 24VDC | 40mA | 30mA | 40mA |
| Thermal Setting | 58ºC | ||
| Response Grade | Comply to EN54, Grade 1 | ||
| Ambient Temperature | -10ºC to 55ºC | ||
| Material | Fire-Proof Plastic | ||
| Dimensions | 102mm(Dia)x58mm(H) | ||
| Weight | 155g | 157g | 165g |
| Color | White | ||
SPECIFICATIONS
| MODEL | B61-5101 |
| Standard | EN 54-11 |
| Operating Voltage | 12VDC ~ 28VDC |
| Standby Current | ≤0.5mA |
| Alarm Current | ≤20mA (equivalent resistance is 470 / 1W) |
| LED indicator | Red, Illuminating when alarm fire |
| Wiring | Two-wire |
| Class | Type A, indoor use |
| Ingress Protection Rating | IP43 |
| Temperature | -10⁰C ~ + 55⁰C |
| Humidity | ≤95%, non-condensing |
| Dimensions | (LxWxH): 88mm x 88mm x 58mm (w/ back box) (LxWxH): 88mm x 88mm x 23mm (w/out back box) |
| Weight | About 160g (w/ back box) About 107g (w/out back box) |
SPECIFICATIONS
| MODEL | B61-6301 |
| Standard | EN 54-3 |
| Operating Voltage | 20VDC ~ 28VDC |
| Alarm Current | ≤35mA |
| Flashing Frequency | 1.4 x (1± 20%) Hz |
| Ingress Protection Rating | IP21C |
| Temperature | -10⁰C ~ + 50⁰C |
| Humidity | ≤95%, non-condensing |
| Dimensions | (LxWxH): 152mm x 91mm x 49.5mm |
| Weight | About 210g |
SPECIFICATIONS
| MODEL Series | BF-AB-0418 |
| Standard | BS EN 54-3 |
| Voltage | 24VDC |
| Current | 25mA |
| Sound Output | 93dB @ 1m |
| Movement | Motor, Pinion and Striker |
| Movement Feature | DC Motor, Acetral Gear Wheel, Steel Striker |
| Material | Steel Plate |
| Base Plate | Molded Black Polycarbonate |
| Dimensions | Ø6″ (152mm) x 58mm (H) |
| Weight | ≈850g |